Real-time electrostatic protection detection
Nowadays, electrostatic protection methods are becoming more and more advanced. Personal anti-static equipment, anti-static equipment, anti-static tools, etc. are almost everywhere, but with these, it does not mean that everything is ready, and there should be tools for detecting these anti-static products. In order to be tested at any time, if it fails, it can be replaced in time.
Real-time detection is a necessary means of ESD control. It should be carried out at any time in the production process. It should not be sloppy. For example, the operator must test the performance of the hand/ankle strap, anti-static clothing, anti-static shoes, etc. before entering the EPA. Therefore, major enterprises must arrange special personnel to be responsible for the inspection and maintenance of the EPA area, and regularly check whether various ESD equipment, turnover containers, grounding devices, etc. meet the requirements of anti-static. If it is found to meet the requirements, it must be rectified in time to ensure production. The foolproof.
Static real-time monitoring is an irreplaceable task in the production process, and it requires a dedicated person, but some manufacturers do not know too much about it, thinking that as long as the full use of anti-static products is OK. Actually, if you just use anti-static products blindly, but don't know when the product will fail, imagine what a terrible thing!