Please keep the static eliminator working well.
In order to achieve the best effect of eliminating static electricity, the existing electronic processing plants purchase anti-static products at all costs, especially for some large-scale enterprises, and constantly increase the static eliminator, not to say that the static eliminator has no effect, but to do It is good to supervise whether the static eliminator can work normally, and also to do the position in the daily nursing work. Once the testing work is not done well, the static eliminator is equal to the waste product and also takes up the workshop space.
The best way to keep the static eliminator working is to start with daily maintenance, such as an ion wind gun:
1 Air gun / wind mouth is easy to break. Pay attention to the anti-collision when using the air gun, and pay attention to the anti-fall after use. Even if the air nozzle is fixedly installed, take care to prevent object collision.
2 The air gun air pressure regulating valve is moderately and appropriately put into the universal anti-rust lubricating fluid.
3 Use absolute alcohol when cleaning the ion gun ion needle and ion chamber. When cleaning, first power off, then use the camera to unscrew the small plastic cover (also called air accelerator) in front of the ion air gun head, use a cotton swab dipped in anhydrous alcohol to clean the inner chamber of the ion needle and ion needle, and inside the inside. The stains and dirt are cleaned.
4 The air supply of the ion air gun is preferably added with a foot switch, or through the linkage control of the electromagnetic valve and the mechanical action, which can improve the use effect and prolong the service life.