Static protection system for inflammable and explosive places
The danger of static electricity is still a new thing in the eyes of some people, but the damage and harm caused by it is not a joke!
No matter whether it is an electroplating workshop or a polishing workshop, there is no need for safety inspection when entering the workshop. Some employees put the lighter in the trouser pocket and bring it into the workshop. If they make a cigarette addiction, they will go to the toilet to smoke one. This is not a behavior. example. In some enterprises, there are countless regulations, and it is common practice for people to check at the same level. After they come to check and do what they are, they still look like they are, and they have not seen any action. Therefore, it is inevitable that an electrostatic accident will occur sooner or later.
In fact, the corporate system is to protect personal safety, especially in this flammable and explosive place, anti-static is absolutely not to be ignored. Isolated conductors are strictly prohibited in inflammable and explosive places. All non-charged metal bodies on production equipment or appliances should be directly electrostatically grounded through metal conductors, making it difficult to accumulate static electricity during the production process.
In the plant that is prone to static electricity, the humidification method is used to increase the relative humidity, which can greatly reduce the electrostatic voltage that may be generated. Workers exposed to dangerous goods should be equipped with anti-static clothing and anti-static shoes. Anti-static clothing, anti-static shoes, and anti-static wrist straps allow the static electricity accumulated to find an effective venting path, thus avoiding personal injury caused by electrostatic discharge.