Talking about the types of anti-static gloves
The anti-static gloves are made of special anti-static woven fabric. The anti-static cloth is made of rayon and conductive fiber. The distance between conductive fibers is 4mm, 5mm and 10mm. The gloves have excellent elasticity and anti-static properties. Anti-static gloves, anti-static plastic (non-slip) gloves, anti-static PU coated gloves (painting or palm coating), etc., mainly used in places with anti-static requirements such as electronics, instruments and other industries, can prevent due to static electricity Damage or aging of the finished product; in the petrochemical industry, it can prevent the danger of burning and explosion caused by static electricity.
There are many types of anti-static gloves, which should be selected according to different protection functions.
1. First of all, you should identify the objects to be protected, and then carefully select them. For example, acid and alkali resistant gloves, strong acid and alkali resistant, only resistant to low concentrations of acid and alkali, should be carefully checked before use, distinguish the level of use and carefully observe whether the surface is damaged, so as to avoid accidents.
2. Rubber and plastic gloves should be kept clean and dry after use. Sprinkle talcum powder on the surface of the gloves to prevent adhesion.
3. Insulating gloves should be inspected regularly for electrical insulation properties. Failure to comply with the regulations may not be used to prevent accidents.
4. Latex industrial gloves are only suitable for weak acid, low concentration sulfuric acid and various salts, and should not be exposed to strong oxidizing acids and other chemical materials.
PU coated gloves are made from 80% dust-free nylon yarn plus 20% high performance copper fiber conductive yarn. The PU coating on the finger or palm helps the assembly operation and does not leave fingerprints. The PU coating is coated with a conductive resin to make it antistatic. It has good air permeability and can be washed and recycled.
The back of the anti-static plastic gloves is made of polyester fiber material, and the palm part is treated with PVC dots on the surface of the glove to achieve anti-slip and increase friction. The glove is treated with antistatic agent and can only be used for one-time operation. Repeat the cleaning.