Although the Spring Festival just started, but many of the electronics factory's call for help, most of them are to carry out static protection planning for the existing production workshop, a rectification of the workshop to ensure that the electronic products produced by the company are no longer subject to The interference of static electricity, the high-end products produced by electronic production enterprises are very low in static voltage resistance. If there is no static electricity protection measures, the electronic components are particularly easy to be burned by static electricity, which causes the products produced to be unable to work normally, seriously affecting the brand effect of enterprises. .
Electrostatic production workshop electrostatic solution - anti-static technology guidance, static electricity, anti-static, anti-static clothing, electrostatic hazard, ESD solution, Tianjin strength anti-static experts share static knowledge when the production workshop static electricity has occurred or is in the bud It is necessary to implement timely and feasible electrostatic solutions. In short, it is always found that simple static precautions are implemented to reduce resources. Maximize value at the lowest cost!
In the semiconductor device manufacturing workshop, since dust is adsorbed on the semiconductor element, product damage may occur, and the yield of the VLSI may be lowered. Operators in the production workshop must wear anti-static overalls, anti-static shoes, anti-static masks, anti-static gloves and other human anti-static equipment to avoid static electricity caused by the human body, resulting in adsorption of dust, dirt and so on.
Therefore, it is necessary to establish an electrostatic protection system during processing and packaging. The IC packaging production line has stricter requirements on static electricity. In order to ensure the normal operation of the production line, the overall decoration of the anti-static building materials for the clean factory, the hardware measures for the anti-static clothing for all personnel entering and leaving the clean factory, and the ion fan in the assembly line and the operation station. Static eliminators such as ion wind snakes and ion wind sticks, these devices are indispensable products in the program. The packaging enterprise can establish a set of anti-static measures according to the relevant national standards and the actual situation of the enterprise to avoid loss! The static eliminator should be regularly tested to ensure the normal operation of the equipment and play its due role.
