What are the detection methods of anti-static products
This article mainly makes two answers for the microelectronics industry, because the microelectronics industry has very simple requirements for clean clothes, which must have anti-static function and withstand friction voltage. We are the first to talk about the anti-static function test: place the tested work clothes on a special test bench (table resistance is greater than or equal to 103Ω), and use the tester to test it. Usually, different points of the work clothes need to be tested, as Between pieces of fabric, between different pieces of fabric, between sleeves and sleeves, between pants and pants, etc.
Test results: Take the average of 5 measurements. I believe everyone can understand this.
The second is the friction voltage test method: on a special anti-static test bench (grounded), the tester rubs the surface of the cloth several times (usually 5-10 times) with a certain strength and speed by hand, and then uses a special The probe of the voltage tester is aligned with the rubbed part at a distance of about 5cm, and the voltage value after the 5th second is read.
Test results: Take 5 times to measure the friction voltage should be less than 100V.
I believe that everyone has a good understanding of this area. Of course, if you still have questions, please come to our production site to take a look at the on-site testing methods. Our main products are anti-static clothing, dust-free clothing, anti-static shoes, dust-free paper, dust-free cloth and a series of dust-free anti-static products.