What are the requirements for laying anti-static mats on the ground?
First of all, when laying anti-static mats, you must understand the current situation of the ground foundation. If the ground is very smooth cement floor, terrazzo bottom surface, ceramic tile bottom surface, or wooden floor, it can be laid. However, the ground must be neat and tidy. It is clean, without unevenness, and there should be no small pits with uneven unevenness. The ground also needs to have a sufficient strength, no sanding and no shelling. Keep the ground dry before laying, this is the ground The premise of laying anti-static products.
Secondly, after using cleaning solution and cleaning agent, clean the ground, connect the ground to the power grid, and use copper strips with a thickness of 0.25mm and a width of 2.5cm. The specific copper strips can be determined according to the width of the ground. Generally, a copper strip is used at a distance of two or three meters. However, when placing the copper strip, the position of the other end should be directed to the outer grounding pole of the earth. After the grounding conductive mesh is laid, lay the anti-static rubber pad on the ground in turn according to the method. If the bottom surface has a large gap, you can use a knife to cut it to make the gap as small as possible.
After that, apply glue to the places with small gaps, let it dry on the ground for about 20 minutes, and try it with your hands to see if it doesn't stick to your hands. When the bottom surface of this anti-static rubber pad is operated, the method is the same. After that, the anti-static product is rolled several times with the weight of the weight, and it can be used normally after two days at room temperature.