Common causes of damage to anti-static hollow board turnover boxes
The anti-static hollow board turnover box is made of anti-static hollow board, and the anti-static hollow board is also called plastic hollow grid board. Its main component is polypropylene or polyethylene. It is characterized by light weight, corrosion resistance and good plasticity. It can also be subjected to secondary processing, but its strength is not as good as that of the injection molding turnover box, the service life is also the same, and the reasons for the damage of the anti-static hollow board turnover box are more diverse. Today, let’s take a look at the common causes of damage to the anti-static hollow board turnover box.
The anti-static hollow board turnover box, hereinafter referred to as the hollow board turnover box, is more likely to be damaged when a fierce collision occurs during the transfer process. It should be understood that the hollow board is called hollow board because there are many grids on it, which makes it easier to bend. Therefore, when handling the hollow board turnover box, try to avoid bumps and bumps to avoid damage to the hollow board turnover box; in addition, In a low temperature environment, the anti-static hollow board will become brittle. As the saying goes, it will be brittle but not firm, which means that when the object is brittle, it will be weak and more likely to be damaged, especially in winter when the temperature is generally low, so in winter When using the hollow board turnover box, try to handle it gently.
In addition, the hollow board turnover box and the use of too long will also naturally age. Everything has a service life. After the hollow board turnover box reaches the expiration date, it is naturally difficult to escape the fate of damage, so it only needs to be tested and replaced in time.