Grounding method of anti-static table pad
When the anti-static table mat is grounded, it needs to be connected to an anti-static ground wire, but some companies do not have a real anti-static ground for cost considerations, and connect the equipment ground wire to a three-phase circuit Go to the ground! It is recommended that the grounding must be of good quality. It is connected to the special anti-static grounding wire. Why do you say that? Because different grounding wires have different functions, you must use anti-static grounding if you are considering anti-static, because equipment grounding, lightning protection grounding, lighting grounding, and so on, they all have Their respective balance points, and this balance point is different from our actual anti-static, it will form a voltage drift, or zero drift, in fact, there is no real grounding, so the anti-static pad must be connected to the anti-static ground Go online, so as to ensure that the quality of anti-static products will not cause problems, and the static electricity can be discharged well.
Table mat anti-static grounding wire description: equipped with claw-type metal buckle nails, easy to install directly on the table mat, the other end of the grounding wire is equipped with a banana plug and alligator clip, easy to insert the grounding socket and directly clamp the grounding wire
Standard method for grounding of anti-static table mat:
A. Lay the anti-static table mat on the workbench, and install the anti-static ground wire on the corner of the workbench; the test is passed, that is, the anti-static ground connection device is basically completed.
B. Cut a small opening on the anti-static table mat and insert it with the star claw part of the ground wire. The star claws must be fastened to the anti-static table mat;
C. The other end of the anti-static grounding wire is an anti-static grounding bus with alligator clips;
D. Measure whether the anti-static grounding wire, anti-static table mat and the earth are connected