How can I know that the wrist strap can discharge static electricity normally
Static electricity is an invisible killer! Invisible and intangible, the instantaneous voltage of several thousand volts may cause fatal damage to delicate and small electronic parts! Electrostatic protection must be meticulous and meticulous. Good grounding becomes the top priority. The traditional alligator clip directly clamped to the ground can no longer meet the requirements of electrostatic protection. The electrostatic ring is frequently swayed and bent during work. Winding and other actions clearly show that a good static ring has problems. In fact, static electricity cannot be completely eliminated. Electronic parts are inexplicably damaged. The poor quality brings us a lot of waste of materials and man-hours! Use the wrist strap online monitor produced by our company to monitor whether the electrostatic grounding is good at any time, so as to reduce and prevent various problems caused by electrostatic discharge!
Wrist strap online monitoring system product introduction:
The wrist strap online monitoring system can monitor and control the anti-static wrist strap in real time. The entire grounding system can be monitored in real time; it can ensure the normal use of the grounding system in the anti-static work area (individual, two or more persons). This product ensures that the ESD status of the operators is 100% monitored.
The wrist strap online monitoring system complies with the *new standard ANSI/ESD S20.20 of the American Electrostatic Protection Association and the *new standard IEC-61340 of the European Electrostatic Protection Association, which have clear requirements on electrostatic grounding in the electrostatic protection area (EPA) Effective electrostatic grounding should be ensured at all times. Use this wrist strap online monitoring system to provide a full-time and real-time electrostatic grounding system alarm, which changes the traditional electrostatic grounding method.
1. Performance description
1. Real-time monitoring of the wearing of the electrostatic wrist strap of the operator and the connection of the ground wire to the earth, and an automatic alarm will be triggered immediately in case of abnormal conditions.
2. It is easy to use and can correctly judge the contact between the ground wire of the ground and the ground wire of the workbench.
3. It can be set according to design needs, generally set to 1.068-2. 0MΩ (±5%), which conforms to international standards, and monitoring parameters can also be set freely.
4. Microcomputer chip control, no debugging, plug and play.
5. Good reliability and strong anti-interference ability.
6. High sensitivity. When the static discharge path fails for ≥0.1 seconds, the monitor will alarm.