How to judge the pros and cons of anti-static table mats
At present, most anti-static table mats are 2mm thick two-layer structure, the bottom layer is black conductive rubber, and the surface layer is static dissipative plastic. There are gray, green and blue, and there are two types of light and matte.



How to judge the pros and cons of anti-static table mats, mainly look at the following five points.
(1) Whether it meets the anti-static index specified by the standard (resistance is 1*10^6 ohm~~1*10^9 ohm, friction voltage <200V, static decay time <2s), the resistance of the newly purchased table mat About 5*10^8 ohms, it is difficult to guarantee the validity period of one and a half to two years.
(2) The surface should have no heavy odor, should not be shiny and free of fine sand. If it is shiny or there are fine sand particles, it means that the anti-static agent is overflowing, and the anti-static performance period will be greatly shortened.
(3) After cutting the table mat according to the required size, lay it on the table top. It should be flat and not warped. Such as the warping will increase with the use time, the more serious the warping.
(4) The color of the mat will not change when exposed to sunlight or strong light.
(5) SGS inspection shall be met, hazardous and toxic gases and substances shall meet the standard requirements.
The above five requirements are based on my years of experience in the anti-static industry. If you have more knowledge and experience of anti-static products, you can communicate with me on the anti-static information network platform.

