How to prevent the degumming of the electrostatic leather on the tooling board
To prevent the degumming of the electrostatic leather on the tooling board, the following methods can be used for maintenance and care:
1. Correct installation:
- Before pasting the electrostatic leather, make sure that the surface of the tooling board is clean, dry, free of oil and dust. Use alcohol or special detergent for cleaning.
- Follow the correct steps to paste the electrostatic leather, avoid bubbles and wrinkles during the pasting process, and ensure that the bonding surface is fully in contact.
2. Use high-quality electrostatic leather:
- Choose electrostatic leather with good quality and strong adhesion. Such electrostatic leather is more durable and not easy to degummed.
3. Regular inspection:
- Regularly check the pasting of the electrostatic leather, and deal with it in time if there are signs of edge or degumming.
4. Edge sealing:
- You can use special edge sealing tape to seal the edge of the electrostatic leather to prevent the edge from degumming first.
5. Reduce physical damage:
- During use, avoid scratching the electrostatic leather with sharp objects. Reducing physical damage can also extend its service life.
6. Proper maintenance:
- For slightly debonded parts, appropriate adhesives can be used for repair.
- For seriously debonded electrostatic leather, it should be replaced in time to ensure the anti-static effect.
7. Environmental control:
- Control the temperature and humidity of the working environment to avoid the environment being too dry or humid, because these two extreme environments will affect the stickiness of the electrostatic leather.
Through the above measures, the service life of the electrostatic leather on the tooling board can be effectively extended to prevent it from debonding.