Installation method of anti-static grounding pile
To install the anti-static grounding pile, you must first find a suitable burying position, as close as possible to the lead-out position of the grounding bus, but also pay attention to keeping the distance from the lightning protection ground at more than 20 meters. The most important thing is to choose a moist soil area as much as possible. Avoid excessive resistance or the inconvenience of digging deeply.
After selecting the location, it is recommended to dig a shallow pit with a larger diameter (both diameter and depth are about 20cm) with a shovel to check whether the soil environment is suitable. If there are more sands and rocks, it is recommended to change the location, if the soil is wet, you can continue Dig down. Because the thickness and structure of the anti-static grounding pile are not suitable for burying in the ground by hammering, it must be dug down to a sufficient depth. However, in order to keep the anti-static grounding pile upright and reduce unnecessary work, it is recommended to dig down. Luoyang shovel can be used, which not only reduces the workload, but also minimizes the impact on the surrounding soil structure and ensures the effectiveness of the installation.
After digging out enough depth, insert the anti-static grounding stake into the hole and keep it upright. Before inserting, tear off the yellow and black warning tapes at both ends so that the conductive carbon black inside can contact the external environment, and then pour it in with water. Mix the long-acting physical anti-corrosion and resistance-reducing agent that has been stirred, and refill the soil after connecting the grounding bus.