Installation method of anti-static L-shaped grounding buckle and anti-static table mat
Our company has professional technical personnel to guide, whether the grounding is correct will directly affect the anti-static effect of the entire production workshop. Why should the assembly line workshop use an anti-static grounding wire? For ESD safety stations, the concept of grounding is to make all conductors at the same potential, so that the potential difference between the two conductors is minimized. Since the power ground and the ground are always in the control area, it is the most convenient connection point. If the anti-static wrist and ESD table pad are connected to the same grounding point, they have the same potential, which is the correct installation method. The anti-static wrist is first connected to the ESD table mat, then passes through the table mat, then passes through the table mat diagonally, and finally is grounded. When connected in this way, the table mat has an additional series impedance (resistance or capacitance) to the ground. Sometimes, the operator It can be at a different potential than grounded desktop equipment or ESD-sensitive equipment on the bench pad. Grounding wire, each socket has 1M ohm resistance; can achieve 0M ohm resistance; black and blue PVC insulation layer; 10 feet of grounding wire. Shenzhen Haiweidahang Technology Co., Ltd. specializes in providing anti-static wrist straps, grounding wires and other anti-static consumables. This model is the quality assurance of the star claw grounding wire. Welcome to buy! It is mainly composed of star claw or buckle cap, thread and alligator clip. There are PVC grounding wire, PU grounding wire, double-hole grounding wire and suction cup grounding wire. There are many forms: suction cup + suction cup grounding wire, suction cup + alligator clip grounding wire, suction cup grounding wire + terminal, screw + alligator clip grounding wire. Can be customized according to requirements. Anti-static grounding wire (suction cup + fish clip) This is the quality assurance of the star claw grounding wire. Welcome to buy! It is mainly composed of star claw or buckle cap, slingshot line and alligator clip. There are PVC grounding wire, PU grounding wire, double-hole grounding wire and suction cup grounding wire. There are many forms: suction cup + suction cup grounding wire, suction cup + alligator clip grounding wire, suction cup grounding wire + terminal, screw + alligator clip grounding wire.
Can be customized according to requirements, the specific installation method is as follows:
1. Lay the anti-static table mat on the workbench, and install an anti-static grounding wire on the corner of the worktable; 2. Cut a small opening on the anti-static table mat, insert it with the star claw part of the ground wire, star claw Be sure to fasten it tightly with the anti-static table pad; 3. The other end of the anti-static grounding wire is a fish clip to clamp the anti-static grounding bus; 4. Measure whether the anti-static grounding wire and the anti-static table pad are connected to the ground, and the test passes , That is, the anti-static grounding device is basically completed