Introduction to Anti-static Rubber Mat
Anti-static rubber is an indispensable product to eliminate static electricity in the electronic industry. Wearing anti-static shoes must be in contact with anti-static rubber to have a better anti-static effect. It can be seen that anti-static rubber is inconspicuous, but equally important . Today, I will share with you the relevant knowledge of anti-static rubber.
Anti-static rubber is generally composed of an anti-static layer and a conductive layer. It adopts a 2mm double-layer composite structure, which is usually black on one side and green or blue or gray on the other side. Black is the conductive layer, made of rubber, the resistance value is 10 to the 5th power, the thickness is generally 1.5mm; the green is the anti-static layer, also called the static dissipative layer, generally made of imported PU resin, resistance The value is 10 to the 9th power and the thickness is about 0.5mm.
Some anti-static rubbers are laid on the ground and some are laid on the workbench. The reason lies in the types of anti-static rubbers. Anti-static rubbers are distinguished between high gloss and matt. High gloss anti-static rubbers are generally laid on the ground because of high gloss. Anti-static rubber will produce strong reflections when exposed to light. If it is spread on the workbench, it will cause damage to human eyes, while spreading on the ground will make the workshop appear brighter and cleaner; while the matt anti-static rubber will be the opposite. , It is diffuse reflection to the light, can protect people's eyes from harm while preventing static electricity.
Anti-static rubber is usually black on the bottom and green on the top. This is to prevent the damage and aging of the device caused by the sudden release of static electricity. When laying, pay attention to the ground or desktop to keep dry to avoid the rot and smell of the rubber due to moisture. .