Method of detecting static elimination equipment
Electronic processing companies use ion fans, ion rods, ion air guns, etc. to eliminate static electricity in more and more factories, but they often do not care about the effect of ion fans, ion rods, and ion air guns to remove static electricity. The rod and ion air gun effect detection link, that is: the ion fan blows out either ion wind or ordinary wind. If it is ordinary wind, this will cause great damage to the product. Now I will tell you a simple and practical method to test the effect of ion fan on eliminating static electricity.
1. First, take a roll of commonly used sealing tape and an electrostatic field tester (also called an electrostatic voltage tester).
2. Let us tear off the tape first. At this time, use an electrostatic field tester to test how high the electrostatic voltage of the torn tape is. You will find that the electrostatic voltage will be as high as several thousand volts or even higher.
3. Next, turn on the ion fan, ion rod, and ion air gun to face the torn tape part. When the ion fan, ion rod, and ion air gun are working normally, aim at the tape with high static voltage, and you can find the tape The static electricity will disappear quickly. It doesn’t take too long for about 1 second. You will be surprised to find that the static voltage at this time is only tens of volts or a few volts. From this point, it can be confirmed that the ion fan in use can be effective Eliminate static electricity.