Reasons for aging of anti-static mats
First, light and air lead to aging: mainly due to the ultraviolet light and ozone in the light, the rubber material is aging.
Second, heat aging: mainly the heat source in the workplace produces higher than the ambient temperature or heat source radiation, electromagnetic waves, etc., so that the table mat heat aging.
Third, the chemical reaction leads to aging phenomenon: mainly due to the use of chemicals, chemical reagents or chemical gases in the work, so that the mat is aging.
Although we have added many anti-aging materials to the anti-static mats, the aging phenomenon cannot be avoided. In order to extend the service life of the mats, please try to do the following:
1. The work site and the surface of the anti-static table mat should be kept clean.
2.try to use UV-free lamps, UV is one of the reasons to accelerate the aging of anti-static mats. Workplace ventilation is better. Minimize the concentration of ozone in the air. Various machines and equipment may generate ozone, electromagnetic waves and electric radiation during operation.
3. the anti-static table mat should avoid contact with the heat source as much as possible. If it is unavoidable, the contact part should use the old anti-static table mat or other equipment to isolate the heat source, which can effectively extend the service life of the table mat.
4. During the use of anti-static mats, please try to avoid chemical contact with anti-static mats. If you accidentally touch them, wipe them off as soon as possible.
5. When cleaning the anti-static mat, try to use environmentally-friendly cleaning materials that do not damage the anti-static mat, and reduce the chemical cleaner as much as possible.
6.the optimal use temperature of the anti-static mat is between 15-30 degrees and the humidity is between 45% and 75%.
The service life of the anti-static mat depends on the environment and the correct method of use. Please use an anti-static mat.