Regular maintenance of the ion fan
If you are using an ion fan frequently, be sure to regularly maintain the ion fan. The following Shengyuan anti-static equipment talk about the maintenance project method of ion fan:
1. The ion fan rotates the governor switch clockwise to turn on the indicator light, that is, turn on the fan, generate ion airflow, increase the wind speed of the fan, and rotate the governor switch clockwise;
When the position is set to “Off”, the indicator light is off, indicating that the ion fan is turned off. To adjust the airflow direction, loosen the bracket plum screw, tilt the body to adjust the up and down position, and then tighten the bracket screw after adjusting.
Clean the ion emitter, rotate the head of the cleaning head clockwise to stop, and then turn it repeatedly until it is clean.
2. The wind speed and static time of the ion fan are determined by various factors. The two most important reasons are the distance of the ion fan and the wind speed.
The air ions are constantly neutralized with each other, and the cations and anions are attracted to each other by static electricity to form a transfer of these charges and recombine. High wind speeds can neutralize them further,
The greater the wind speed, the faster the static electricity is neutralized. When using an ion fan for electronic assembly, the ionized airflow should cover the working area as much as possible, so that the positive and negative charges on the surface of the object can be well neutralized to maintain neutralization.
3. Clean the launching point of the transmitter, rotate the head of the cleaning head clockwise to stop and let go, then turn it repeatedly until it is clean, at least once a week.
The air inlet and ionization outlets should be kept clean to prevent airflow and can be cleaned with a soft brush or compressed air.
4. Measure with a plate load monitor or use an ion fan ion tester to measure ion balance. The test instrument brand is MONROE (ME-268A).
Or use an ion tester to measure the ion balance (residual voltage). The output of the ion fan to the ion volume is designed to be smooth and fixed. Due to possible voltage fluctuations。
