Simple maintenance method of ion fan
Daily maintenance of ion fan: firstly, the air inlet network and the ionized air outlet should be cleaned to avoid blocking the airflow by dust and other debris. In the process of use, we can add a streamer to the front of the ion fan to easily check the fan's operating status and also It is a kind of visual management; the filter of the air inlet of the ion fan needs to be cleaned regularly, how long is it? In fact, it can be customized according to the internal environment of the factory workshop;
The second is to clean the ion discharge needle on the needle holder of the ion fan. Each shift can allow employees to rotate the rotating cleaning brush of the ion fan more than three times back and forth. Of course, some ion fans are automatically cleaned regularly. OK, there are also ion devices without discharge needles, such as: X-ray ion devices;
Finally, the ion discharge needle should be cleaned regularly with a cotton swab or anti-static brush dipped in alcohol according to the amount of engineering. It should not be cleaned with water and Tianwa water when paying attention here. In the cleaning process, special attention should be paid to cleaning Be sure to disconnect the power before. Generally, the factory will clean the dust around the insulator and the discharge needle according to the environment and usage conditions to avoid the degradation of the insulation performance of the surface of the machine caused by itself and the absorbed moisture, and extend its service life.
For the above simple maintenance, we must do it regularly, otherwise the consequence will be the investment of high costs (manpower, equipment damage, product failure, etc.). Well, I will talk about the simple maintenance of ion blowers here. If you have any good opinions and suggestions, please pay attention to me to discuss and study together.