SL-1104 IONIZING AIR BLOWER
Before installing SL-1104, the compact fluorescent bulb must be installed. The bulb is packed in cushioning material inside the blower’s lamp compartment. Remove the front cover with a screw driver. Unpack the bulb and install by screwing it into the lamp socket. Replace the front panel.
SL-1104 Overhead Ionizing Air Blower is a device of the ionizing air blower series. The SL-1104 blower is an overhead unit designed to provide total coverage for electrostatic problems.
Please read the instruction manual completely before installing or operating the device. This device is equipped with a 3-wires grounding plug and must be plugged into a 3-terminal grounded socket. Do not modifying plug or using an ungrounded power socket. If an extension cord is required, it should be used only a 3-wire extension cord with grounding.
Do not insert any object through intake or outlet grille.
Do not operate the unit under inflammable or explosive atmospheres.
SL-1104 Ionizing blower should be located 600 to 900mm above work surface with center fan directly above critical area. There should be no cross flow of air between unit and work surface. Drafts from air conditioning or heating air outlets can affect the performance of this device.