What are the precautions for installing anti-static rubber floor mats?
Although the process of installing anti-static rubber floor mats is not complicated, certain steps and precautions need to be followed to ensure its anti-static effect and durability.
First, the ground needs to be processed before installation. The base floor can be a water-polished, porcelain floor or wooden floor. It must be flat and smooth without obvious unevenness, and the ground strength must be sufficient without sanding or peeling. In addition, the ground needs to be kept dry and clean to facilitate the effective bonding of special glue.
The specific installation steps include:
1. Clean the ground to ensure that there are no impurities.
2. Measure and cut the floor mat to fit the coverage area.
3. Lay a double-conductor copper foil to set up a grounding grid, one end of which needs to be led to the earth to ensure that the grounding performance of the floor mat meets the specification requirements
3. Apply conductive glue or cloth-based double-sided tape on the ground to fix the floor mat to prevent sliding or displacement.
4. Bond the anti-static floor mat to the ground and roll it with a heavy roller to ensure the surface is flat.
5. Regularly check and maintain the overall condition of the floor mat and the integrity of the grounding system.
In summary, although the installation and construction of anti-static rubber roll flooring is relatively simple, it still requires careful operation and following the correct steps.