When Purchasing An Antistatic Product, You Need To Confirm More

Nov 21, 2018 Leave a message

Buy more anti-static products to confirm

Vetus SS-SA.jpg

Buyers, when purchasing anti-static products, do not know how to buy genuine and fake products, resulting in the production line, when using the purchased anti-static products, the electronic devices are not effectively prevented by anti-static products, resulting in a decline in product quality. At present, there are many types of anti-static products on the market, and the performance and quality are different. Therefore, according to your actual needs, you should pay more attention to the performance and parameter values of the products.


93305 ESD tweezers.jpg

1. Look at the color: Most anti-static products are designed to reduce their own resistance value. Manufacturers often add carbon black during production, so the color will be deeper. However, products with deep colors are not all anti-static products. For example, the anti-static plastic turnover box is black, but the black plastic turnover box is not necessarily anti-static. It can be injection molded from a non-static black masterbatch.


2. Measure the resistance value: measure the resistance value of a certain distance on the surface of the product with a megger or surface resistance tester. The product with a resistance lower than 1011 Ω is an anti-static product. For a good anti-static product, the resistance value is generally 106 Ω. Between 109Ω. The larger the resistance value, the worse the antistatic effect, and the insulation product is more than 1012 Ω. It should be noted that the resistance value of anti-static products should be consistent inside and outside, but some common products can be anti-static in a short time after being treated with anti-static liquid, so the price is lower, but with anti-static When the liquid is consumed, the antistatic effect will drop until it disappears. Before measuring the resistance value, you can clean the surface several times, dry it and then measure it, or measure the resistance between the inner and outer surfaces to see if it meets the requirements of the product.