Anti static shoes fully unveiled
The anti-static safety shoes are made of static dissipative material PU to make the sole, which is integrally formed with the upper surface, and has a beautiful appearance and stable performance. The front of the shoe is covered with a steel toe cap to protect the toes. Applicable to the machinery and electronics industry, construction industry, container storage and transportation industry and shipbuilding industry.
Technical parameters of safety shoes:
Upper material: PU leather, embossed real cowhide or plain grain leather
Sole: PU (polyurethane) Earth resistance: 1 × 105 - 1 × 109 Dimensions: 230mm - 290mm Steel head anti-mite: anti-equal to 200 J (J) impact
Choosing the right safety shoes WSI recommends that you understand the causes of the direct or indirect injury to the employee's feet before choosing. The following six items are available: 1. Touched by hard, rolling or falling objects.
2. Pierce the sole or body with sharp objects.
3. Cuts from sharp objects and even tears the skin.
4. The site is slippery and easy to fall.
5. Contact with chemicals, molten metals, high temperature and low temperature surfaces.
6. Work in an environment filled with flammable gases. If the release of static electricity is not appropriate, it may become a source of ignition at any time, causing an explosion. In addition, the conductivity of the foot can also affect the risk of electric shock when an employee touches an electrical device. Recognizing the above reasons that jeopardize the employee's feet, it helps to analyze the safety shoes. When choosing,
The following factors must be carefully considered:
1. Construction environment. For example, is the site slippery? Is the venue uneven? Does the environment have anti-static requirements? Are there many wooden strips or other sharp obstacles that show nails nearby?
2. Materials in contact. Such as corrosive chemicals, hot liquids or bulky and difficult to hold goods and rollers.
3. Machines and equipment used or in contact. For example: electric power equipment, forklift trucks, etc.
4. Processes such as pouring chemicals, handling high temperature liquids, and manpower handling. After careful analysis, you should try to list the issues that can directly or indirectly endanger the safety of the employee's foot throughout the workflow. In order to achieve a responsible understanding of the staff and a comprehensive understanding of the prevention of accidents.
ESD Safe shoes should be used where they are used. Proper use and maintenance methods are in place to ensure that the safety shoes perform as intended and maintain the user's foot health.
Therefore, the following matters should be paid more attention:
1. Do not modify the construction of safety shoes without authorization.
2. Wear safety shoes that fit your own foot code to help maintain the health of the wearer's foot and extend the durability of the footwear.
3. Pay attention to personal hygiene. Users should keep their feet and shoes clean and dry.
4. Clean the safety shoes regularly, but do not use solvents as detergents. In addition, the sole must be cleaned frequently to avoid accumulation of dirt, because the electrical conductivity or anti-static performance of the sole is affected by the amount of adhering dirt and the flexing condition.
Safety shoes maintenance
1. Safety shoes are recommended to be directly cleaned by hand. It is not advisable to take machine washing to avoid the cracking of the leather and the displacement of the steel toe in the collision between the steel toe cap and the machine during the machine washing process.
2. The immersion time of safety shoes should not exceed 20 minutes, the cleaning temperature should be lower than 40 °C, neutral detergent should be used, and oxidative or corrosive washing liquid (such as 84) should not be used.
3. Safety shoes can be weakly dried, the drying temperature should be lower than 60 °C, and hanging drying should be used in the drying process. It is recommended to use a hot circuit wind.
4. During the whole cleaning process, you can use a soft brush for light brushing. The flow process should be handled gently to avoid damage to the steel toe cap. 5. If the accessories such as insoles and laces are removed, they should be cleaned separately.
6. Normal use, professional washing, warranty cleaning 30 times.