Application scope and precautions of anti-static rubber mat
Scope of application
In order to reduce or eliminate the hazards of static electricity, the production workshops and advanced laboratories of the microelectronics industry such as electronic semiconductor devices, electronic computers, electronic communication equipment and integrated circuits need to lay anti-static table mats or anti-static floor mats. After the ground mat) is laid and grounded, the working surface will discharge the static electricity of the human body, so that the ESD tweezers, tools, appliances, meters, etc. in contact between the human body and the table surface reach a basically uniform potential, so that the electrostatic sensitive device (SSD) is not frictionally charged Such as the interference of the wide step belt caused by electrostatic discharge, so as to achieve the effect of electrostatic protection.
Precautions when using
⒈The surface of the product is strictly prohibited from contacting acid and alkaline solvents (such as benzene, alcohol, etc.). This may cause the surface of the product to discolor, fade and decline in resistance. If cleaning is needed, wipe the cloth with a neutral solution (such as water, etc.).
⒉The glue used should not only be compatible with the bottom of the rubber pad product, but also with the material of the workbench. It is firmly bonded and will not shrink after the product is stuck. It is recommended that mass production be carried out after trial pasting.
3. Product shrinkage: The rubber content of the product is higher than the ordinary table cushion, the durability increases, and the tensile strength increases. It is recommended that the product specifications be lengthened and relaxed when cutting, and stored for 24 hours at the same time, so that the product has a fatigue recovery process. Carry out glue bonding production.