Dual-circuit anti-static wrist strap product features and parameters
A device that is worn on the wrist of a human body and vents the body to accumulate electrostatic charges. It is divided into a wired type and a wireless type, and has a metal ring and an elastic conductive wire mixed ring. This product belongs to the anti-static wrist strap buckle adjustment wire type, it can effectively protect the zero-resistance parts, from the interference of static electricity, to discharge the static electricity of the human body. It consists of an anti-static elastic band, a snap button, a spring cord, a protective resistor and a collet. The inner layer of the elastic band is woven with an antistatic yarn, and the outer layer is woven with ordinary yarn. The principle of the anti-static wired wrist strap is to guide the static electricity of the human body to the earth through the wrist strap and the grounding wire. In use, the wrist strap is in contact with the skin and the ground wire is grounded directly for maximum effectiveness.
Put on this anti-static wrist strap, which can safely remove static electricity generated in the human body within 0.1 seconds. The grounding wrist strap is the most basic and most commonly used in anti-static equipment.
The product is provided with a snap on the outer side of the plastic block, and the snap is connected to the plastic web by the metal connecting piece and connected to the conductive webbing on the inner side of the plastic block to form two independent circuit loops, the plastic block is divided into left and right. Two pieces, two plastic blocks are hingedly connected to each other, and the snaps on the outer sides of the two plastic blocks are respectively connected with the respective grounding wire end buckles; the product is compared with the existing traditional wrist band, when the wrist band wearer is unaware Even if one loop fails, the other loop can continue to work, reducing the probability of electrostatic breakdown of the electronic component insulation layer, avoiding mass rejection or quality degradation, low cost of use, and extending the life of the wrist strap. Suitable for higher end customers.
Dual circuit wrist strap product features and parameters:
1. Double loop electron
2. Wrist ring: the rubber band can be adjusted;
3. Material: two plastic sheets (PA6);
4. Color: red and blue;
5. Wrist ring resistance: ≤103Ω;
6. Coiled wire: PU outer skin, inner package
7. Core copper platinum