Dust removal is simple, just use sticky mats
In our lives, we will always see doormats in shopping malls, restaurants and even house entrances. Door mat is a product that can effectively remove dust and water at the entrance and keep the indoor floor clean. It is soft and supple and feels comfortable on the feet. Unique anti-ultraviolet additives can prevent discoloration and brittleness, and can withstand outdoor sun and rain.
For more advanced dust-free workshops, this cleanliness is far from enough. The daily work of the workshop staff is tedious and tedious, and it is necessary to provide them with a clean and comfortable environment. Dust is a big problem in the workshop. If workers inhale dust for a long time, it is also harmful to their health. In clean rooms with high requirements for cleanliness, sticky mats appear. We can choose sticky mats to make the workshop zero dust. The sticky mat is mainly suitable for sticking on the entrance or buffer zone where dust and purification space are needed. It can effectively remove dust on shoe soles and wheels, greatly reduce the impact of dust on the quality of the purified environment, and achieve simple dust removal.
The sticky mat produced by our company consists of 1 layer of non-adhesive PE base film + 29 layers of PE double-sided adhesive film + 1 layer of PE double-sided adhesive film. Each layer has a 1-30# number label (as shown below) in the lower left or right corner for easy replacement. Each layer of the adhesive pad is coated with a unique high-viscosity or low-viscosity adhesive viscosity size suitable for different places. The digital tag promotes the separation between the sheets, and the multi-layer straight-edge adhesive floor mat can quickly and effectively remove the dust carried by the wheels and shoe soles of transportation vehicles, thereby keeping the environment clean. When using, please remove the protective layer of the rubber surface from the opening on the back, then lay it flat on a clean and water-free access floor, and use the sole to flatten the adhesive pad to the ground, then remove the protection from the opening from the front Layer for easy use. If the surface of the film is covered by dust during use, please tear off the layer from the opening so that the next cleaning film can be used again.