Green anti-static table mat
ESD TABLE MAT has shock-proof, anti-fatigue function, internal mesh structure, very uniform resistance distribution, volume resistance ≤107Ω㎝, short electrostatic discharge time, and service life of not less than two years.
[Scope of application] The anti-static table mat is mainly used for paving desktops, assembly line work surfaces, shelves, etc., and can meet the needs of different conditions and different environments.
【Additional explanation】
1. Product introduction:
Product description: GD08 is green on the top and black on the bottom, double-layer composite structure. GD08 adopts an intermediate mesh structure, which has the advantages of good electrostatic discharge effect and fast discharge. Main material: The main material is modified high-elasticity PVC produced in Japan
2. Anti-static technical indicators and parameters
Green surface≤109Ωcm Bottom black smooth surface 105Ωcm Attenuation period 5000-500V Not less than 1.6S Flame retardant effect
3. Shelf life:
2 years. Within 2 years, the anti-static decay period shall not exceed 109, otherwise it shall be replaced, and product problems caused by improper use of human beings,
If the color of the outer surface of the product is discolored, faded, scratched, worn, the shrinkage becomes shorter, and the resistance value does not meet the requirements, it is not within the warranty. Avoid using volatile liquids for surface cleaning, such as alcohol, acetone, toluene, banana water, etc.
Four. Precautions:
⒈ The surface of the product is strictly prohibited from contacting acid and alkaline solvents (such as benzene, alcohol, etc.), which may cause discoloration, fading and decline of resistance value on the surface of the product.
For cleaning, it may be wiped with a neutral solution (such as water, etc.) on a rag.
⒉ The glue used should be compatible with the bottom of the table mat product and the material of the work table, so that it is firmly bonded and will not shrink after the product is stuck. It is recommended to test paste before mass production.
3. Product shrinkage: The glue content of this product is higher than that of general table pads on the market, the durability is increased, and the tensile strength is also increased. It is recommended to lengthen and relax the product specifications when cutting, and store it for 24 hours to allow the product to have a fatigue recovery. process, and then carry out glue bonding production.
Fives. This product does not change color in normal indoor use, is not easy to age, and has a long anti-static life.
The advantage is that the electrostatic discharge is fast and uniform.