How can I find out if the anti-static wrist strap is working properly?
The traditional alligator clip directly clamped to the ground wire can not meet the protection requirements of static electricity. Dongguan anti-static wrist strap ring is used in the work because of frequent swinging, bending, winding and other actions, clearly a good electrostatic ring, in fact it has There is a problem, but it has not been discovered in time. The most common is that the contact with the wrist has fallen off, and the operator has neglected to continue working. The static electricity cannot be completely eliminated. The ESDS product is inexplicably damaged, bringing us a lot of materials and working hours. Waste, use the wrist strap online monitor to monitor the grounding of the anti-static wrist strap at any time, reduce and prevent various defects caused by electrostatic discharge.
With the rapid development of semiconductor technology and large-scale integration technology, most of the electronic zero devices tend to be highly integrated. This gives the final production application more stringent requirements, and static elimination protection is an important part of it. The data indicates that the damage in most integrated components and semiconductor devices in actual production is due to static electricity. Electrostatic rings rely on good grounding as the most primitive and most effective way to eliminate static electricity. However, when electrostatic protection is applied to the electrostatic ring, most electronic manufacturers will still have the following blind spots of static electricity protection: they cannot immediately know whether the electrostatic ring protection is working normally; even if the traditional electrostatic ring passes the inspection outside the workshop, During the production process, it is impossible to know whether it is working properly; the staff of the workshop is not responsible for the electrostatic protection of the electrostatic ring;
The company's anti-static protection flow in the form of dealing with the situation and the detection of inaccurate and other perfunctory conditions caused the product non-performing rate to rise; because of the inability to know the static protection of employees, blindly add static protection products, resulting in the burden of personnel and company costs; When the static electricity protection fails, the traditional electrostatic ring electrostatic ring is detected once every two hours, which causes labor waste and management difficulty. The wrist strap alarm provides real-time continuous monitoring and control of the anti-static wrist strap. This product ensures 100% monitoring of the ESD status of the operator. HWD series of ESD protection products comply with the latest regulations of the American Electrostatic Protection Association ANSI, ESD S20.20 and the European Electrostatic Protection Association's latest specification IEC-61340, and the requirements for electrostatic grounding in the Electrostatic Protection Zone (EPA) should be ensured at all times. Effective electrostatic grounding, using the HWD series of instant electrostatic grounding system monitors, fully meets this requirement.