How to use the sticky pad
The dust sticking pad is generally placed at the entrance of the clean room or between the buffer zone. It can effectively remove the dust on the soles of the shoes and some wheels, and can minimize the impact of dust on the quality of the purification environment, thereby achieving the effect of dust removal. In order to let everyone have a better understanding of the sticky pad, the following editor will tell you how to use the sticky pad? Sticky pad specifications and manufacturers.
How to use the sticky pad?
1. When using the sticky pad, first remove the protective layer of the rubber surface from the opening on the back, and then stick it flat on the access floor. The floor must be dry without any trace of water.
2. After attaching, use the sole to flatten the sticky pad to the ground, and then remove the protective layer on the surface of the sticky pad from the front opening.
3. When the surface of the film is full of dust during use, the viscosity of the sticky pad will decrease. At this time, it is necessary to tear off this layer of sticky pad. It is also important to remove the sticky pad. The four corners of the dust pad are slowly separated from the pad, and then move closer to the middle to wrap the dust inside. Fold the film inward until it is small enough to be discarded. This will ensure that the pollutants attached to the dust pad do not Fly everywhere to ensure the dust removal effect.
Sticky pad specifications
The normal size of the sticky pad: 26〃 * 45〃24〃 * 36〃18〃 * 36〃 inches, but it can also be made into different sizes according to requirements.