Ion fan usage requirements and cleaning and maintenance methods
1. The role of ion fan:
The main function of the ion fan is to remove static electricity. It has outstanding performance in removing static electricity, preventing electrostatic pollution and damage. This main point removal performance comes from its working principle. The charge on it is neutralized. When the charge on the surface of the object is negative, it will attract the positive charge in the airflow; when the charge on the surface of the object is positive, it will attract the negative charge in the airflow. When the same amount of positive and negative charges are in contact, electrical neutralization can be achieved.
2. The use requirements and cleaning and maintenance methods of ion fans:
1. Requirements for the use of ion fans
(1) Pay attention to moisture
The use of ion fans needs to be moisture-proof, because ion fans are mainly composed of electrical parts and circuits. For example, if water seeps into the electrical control box and related electrical components accidentally, the equipment parts will be damaged. For a long time, the ion fan will not be able to be used. Therefore, it should be kept away from water vapor, corrosive gas, dust, etc. No liquid or insufficient liquid level in the washing tank will also cause irreversible damage to the equipment. When using it, ensure that sufficient washing liquid is injected into the tank, otherwise the related electric heaters, pumps, and ultrasonic vibrators may be damaged and possibly damaged. Causes fire and personal injury.
(2) Pay attention to power supply safety
You must pay attention to the safety of the power supply when using the ion blower. Because this equipment is in contact with water and corrosive (swelling) liquid level, it is easy to cause leakage. When installing the ion blower, you must purchase a power supply that meets the equipment specifications, power cords and user-side In the power circuit, it is necessary to install an air switch dedicated to the washing machine, which can be used to cut off the power supply of the washing machine at the time of cleaning. Because this equipment is in contact with water and corrosive (swelling) liquid level, it is easy to cause leakage. Please connect the grounding wire according to safety requirements.
(3) Safe to use
When using the ion blower, you must pay attention to safety. If the ion blower fails or is abnormal, if you can’t find the cause in the first time, please turn off the power first and ask a professional master to repair it. Remember to study it slowly, because we are concerned about this. not very clear.
2. Cleaning and maintenance method of ion fan:
(1) Air inlet and outlet cleaning
Turn off the ion blower switch first, then turn off the power, and start cleaning the air inlet and outlet, because the air inlet net and ionization outlet net are prone to dust or foreign matter during use, so they need to be kept clean to prevent blocking the airflow. If blocked, you can use soft Brush cleaning or compressed air cleaning.
(2) Clean the launch point of the launcher
First turn the governor switch clockwise until the indicator light is on, that is, turn on the fan. When the ion airflow is generated, increase the wind speed of the fan. You can turn the governor switch clockwise; turn it to the "off" position, and the indicator light will go out. Indicates that the ion fan is off. Then adjust the airflow direction to loosen the bracket Torx screws, tilt the body to adjust the up and down positions, and then tighten the bracket screws. Then clean the ion emitter, turn the handle of the cleaning head clockwise to stop, and then turn it repeatedly until it is clean.
(3) Maintenance of ion fan
The wind speed neutralization time of the ion fan is determined by many factors. The two most important reasons are the distance and wind speed of the ion fan. Air ions constantly neutralize each other, and cations and anions attract each other through static electricity to form the transfer and recombination of these charges. The second is that high wind speeds can neutralize them farther away. The higher the wind speed, the faster the neutralization of static electricity. When using an ion fan for electronic assembly, the ionized airflow should cover the working area as much as possible, so that the positive and negative charges on the surface of the object can be well neutralized and kept in a neutral state.
(4) Ion fan maintenance
First use a plate load monitor to measure or use an ion tester to measure the ion balance. The test instrument brand is the United States MONROE (ME-268A) or the ion tester is used to measure the ion balance to measure the residual voltage. The output design of the ion fan to the ion volume is stable and fixed. It may be subject to voltage fluctuations and dry ambient air. The influence of humidity and other factors will cause the deviation of ion balance.