Production process of latex gloves
Latex gloves are a kind of gloves. They are different from ordinary gloves and are made of latex. They can be used in household, industrial, medical, beauty and other industries, and are essential hand protection products. The latex gloves are made of natural latex and other fine auxiliaries. The products are specially surface-treated and comfortable to wear. They are widely used in industrial and agricultural production, medical treatment and daily life. The characteristics of latex gloves are unique fingertip texture design, which greatly enhances the grip and effectively prevents slipping; no palm pattern patent design, uniform glue penetration, enhanced protection; unique hand design, cotton lining, improve comfort.
The production process of latex gloves: the rubber is first sliced by a rubber mixer, and then sent to a sol tank to mix the sol with gasoline. The sol is then emulsified and modulated and then pumped to the latex intermediate tank. The rubber solution dissolved in gasoline is fed from the top of the distillation tower, heated and distilled by steam, the light component gasoline is heated into a gas phase, and the gasoline gas is mixed with cold water in the oil and gas cooler and cooled. The oil-water mixture is then sent to the oil-water separator, and the oil-water layer is separated. The upper layer gasoline is recovered, and the lower water is pumped to the cooling water tower for cooling, and then the gas gasoline in the distillation tower is cooled; the latex in the distillation tower kettle is sent to the latex mixing tank to be stirred according to its own pressure, and after being modulated, it is sent to the centrifuge to separate the glove raw material latex. After toning and filtering, it is ready for use. The glove model is first cleaned with acid and alkali and washed with water. The cleaned model is first immersed in hot water and heated, then dipped in coagulant and dried for dipping. After dipping, it is sent to the oven for preliminary drying, the fiber inner sleeve is added, and the hot water is sent to the oven for vulcanization, drying and molding. After the gloves are demolded, they are inflated for inspection, shaped at low temperature, dried at medium temperature, washed with water, dehydrated, dried, and then packaged and sent to the finished product warehouse.