How to Properly Use an Antistatic Resistance Tester
An antistatic resistance tester is primarily used to measure the resistance value of materials or devices to ensure they meet antistatic standards (e.g., within the range of 10⁵ to 10¹³ Ω).
Proper Usage of an Antistatic Resistance Tester:
1. Preparation
Check the instrument's status: Ensure the tester has sufficient power (battery or external power supply), and that the probes and grounding wire are intact.
Environmental requirements: The test environment should avoid high humidity or strong electromagnetic interference; the recommended temperature is 20–25°C.



Calibrate the instrument: Some testers require zeroing (adjust the "zero adjustment" knob until the pointer is at the center).
2. Test Procedure
Connect the test object:
For small objects (e.g., batteries, chips), use a clip to secure the probe, ensuring a clean contact surface.
For large-area objects (e.g., antistatic flooring), use a flat probe, ensuring tight contact with the surface.
Select the test mode:
Point-to-point resistance test: Place the two electrodes on two points of the test object and read the stable resistance value.
Ground resistance test: Connect the grounding wire, clip one end to the grounding wire, and the other electrode to the test object.
Read the data:
Press the test button, wait for the value to stabilize (usually a few seconds to tens of seconds), and record the resistance value and unit (e.g., 10⁶Ω).

