Anti-static heel strap detection method
When using an electrostatic heel strap, each user should wear both feet at the same time to increase the contact time and continuity of the heel strap with the ground, thereby reducing the possibility of human body electrostatic harm.
1. Related parameters:
1. Rubber surface resistance
Conductive layer 10^3-10^5Ω
Dissipative layer 10^6-10^9Ω
2. The resistance of conductive webbing to ground is 10^6Ω (1MΩ)
Conductive tape length 400-450mm (can be made according to customer requirements)
2. Matters needing attention:
1. Each user should wear both feet at the same time when using the electrostatic heel belt to increase the contact time and continuity of the heel belt with the ground, thereby reducing the possibility of human body electrostatic harm.
2. The conductive webbing must be in good contact with human skin.
3. It must be used on the anti-static floor glue or the ground where the system is grounded.
4. The anti-static heel strap must be fastened to ensure the anti-static effect and safety and anti-stumbling.