Anti-static turnover car
Anti-static turnover carts are not harmful to the human body. Generally, anti-static PCB turnover carts are divided into anti-static storage space (PCB board), steel frame, anti-static roller and/or anti-static metal chain; static electricity passes through the anti-static roller and Metal chain release. The easiest way to install an anti-static turnover cart:
1. First, connect an outer frame with 4 supporting rods and tighten them with screws;
2. Put the required PCB slot board on the round rod, pay attention to the single-sided board on the two ends, and the double-sided board in the middle;
3. Install another frame and tighten it with screws;
4. Install anti-static casters, which can be clamped with strong pliers;
5. Adjust the distance according to the size of the PCB board.
It is not necessary to have. If the four wheels of the turnover car are all ESD, use a heavy hammer type surface resistance tester, one on the car and one on the floor. If the test resistance is lower than the 9th power of 10, it means the turnover The car to the ground is OK.