Does the ion fan affect the clean room?
Whether it is an electronics factory or a biopharmaceutical factory, it needs a dust-free, anti-static environment to operate. The ion fan plays a very important role in it. Need to use a clean room above 100,000, and the effect of dust removal and static electricity removal is also very obvious. Therefore, the ion fan is one of the necessary equipment for clean rooms.
Ion blower is a corona method using high-voltage corona. The end of the discharge needle ionizes the air into positive and negative ions, which are then blown to the surface of the object by the built-in fan. These charged ions can automatically neutralize the static charge of the receptor, so as to achieve the purpose of eliminating static electricity. At the same time, it can blow off the dust and tiny particles adsorbed by static electricity on the surface of the object to achieve the purpose of dust removal.
In the early stage of building a clean room, a large air shower room needs to be used to filter static electricity and dust on the surface of people and objects. The principle of this device is a bit similar to an ion fan, which can be regarded as a simple ion fan; then it is to eliminate static electricity entering the workbench and studio. Because static electricity is different from dust, it can be generated anytime and anywhere. Dust can only enter from the outside. Therefore, it is necessary to eliminate static electricity at all times. The ion fan is almost locked on the workbench to maintain uninterrupted work; the high efficiency ion fan can be within a few seconds To remove static electricity, the charge can be instantly reduced to below 10 volts by blowing a fan. Ion fans are not only widely used in clean rooms, but also widely used in industries such as aviation materials, semiconductor components, packaging and printing, and plastics. Of course, choosing high-quality suppliers and excellent products is very important. The ion fan of the clean room will also be a must for all businesses in the electrostatic removal industry in the future.