ESD Warning Tape Storage Method

ESD warning tape storage method

 ESD warning tape is made of PVC film as the base material and coated with rubber pressure sensitive adhesive. It has the advantages of waterproof, moisture-proof, weather-resistant, corrosion-resistant, anti-static, etc., and is suitable for the anti-corrosion protection of underground pipelines such as air pipes, water pipes, and oil pipelines.

    1. Adhesive tape should be stored in a warehouse to avoid sunlight and rain; it is forbidden to contact with acid-base oil and organic solvents, keep it clean and dry, 1m away from the discovery device, and the room temperature is between -15°C and 40°C.

    2. Adhesive tape should be placed in rolls, not folded, and should be turned over once a quarter when stored for too long.

    3. When loading and unloading the conveyor belt, use a crane, and use a rigging with a crossbeam to hoist it smoothly to avoid damaging the belt edges. Do not load and unload arbitrarily, which may cause loose rolls.

    4. The type and specifications of the tape should be selected reasonably according to the use needs and specific conditions.

    5. It is not allowed to use tapes of different varieties, different specifications, models, strengths, and cloth layers together (matching groups).

    6. Conveyor belt joints adopt thermal vulcanization bonding to improve reliability and maintain high effective strength.

    7. The diameter of the conveyor roller of the conveyor and the smallest pulley diameter of the conveyor belt should meet the relevant regulations.

    8. Do not make the tape snake or creep, keep the drag roller, the vertical roller flexible, and the tension should be moderate.

    9. When the conveyor is equipped with baffles and cleaning devices, the abrasion of the tape should be avoided.

    10. Cleanliness is the basic condition for the tape to run well. Foreign matter will affect the eccentricity, tension difference, and even breakage of the tape.

    11. When the tape is found to have early damage during use, the cause should be found and repaired in time to avoid adverse consequences.