Improved on-site management of ion fans
In the manufacturing process, enterprises generally use ion fans to neutralize static electricity. Ion fans are simple and easy to operate. You only need to turn on the power, adjust the angle and wind speed, so that it can act on the objects to be neutralized (usually Cover the product and its surrounding high-static power supply).
But no matter how simple the operation is, it depends on on-site operators. In fact, many companies will encounter some abnormal problems of ion fans when simulating production site audits. The wind speed also cannot affect the objects to be neutralized static electricity.
This shows that it is unreliable to control the operation of the ion fan only by the memory of the personnel, so we need to consider the operation and control of the ion fan from other aspects. Today we will talk about the improvement of the control and control of the power supply of the ion fan.
The production site is generally equipped with fluorescent lamps due to environmental illumination requirements. Enterprises can consider linking the power supply of the ion fan of the production line to the power switch of the fluorescent lamp of the corresponding area or position. To start the fan, please set the switch of the device itself to the normally open state, such as glueing the switch, locking and shielding of the panel switch, so as to avoid the risk of misoperation by employees to shut down).
Improvement 1: The post ion fan and the lamp power supply share a switch
Improvement 2: Use the same switch panel for the ion fan power supply and the lamp socket power supply
Improvement 3: In addition to the above improvement methods, there may be situations where there is no workbench at the production site of the enterprise. At this time, you can consider connecting the power of the ion fan to the light switch panel of the area or the power switch of the equipment that must be activated , Such as: the assembly line pull body power switch.
The company can consider the location of the associated switch according to the actual site conditions, and should select the equipment power supply that must be started during the production process (note that the associated switching power supply should not exceed the rated input voltage of the ion blower, such as: the ion blower needs 220V power supply access, switch Do not connect to 380V power cord)