Specifications for the use of labor protection work shoes
Labor protection work shoes are mainly used in specific working environments to protect workers' footsteps from environmental damage. Therefore, in different working environments, you must choose corresponding labor protection work shoes, so that they can provide better protection. Today , Jingshang Jingmei will share the usage specifications of labor protection work shoes.
Oil-proof labor protection shoes are used in places where there is oil on the ground or oil splashing; waterproof labor protection shoes are used in workplaces where there is water on the ground or splashing water; cold-proof labor protection shoes are used to protect the feet of workers working at low temperatures to avoid frostbite. Anti-puncture protective shoes are used to protect the soles of the feet and prevent them from being punctured by various sharp and hard objects. The main function of anti-smash labor shoes is to prevent feet from being hurt by falling objects. The front toe cap of labor protection shoes has impact-resistant material. The main function of steelmaking labor protection shoes is to prevent burns and punctures. They should be able to withstand a certain static pressure and temperature, and be non-flammable. This type of labor protection shoes is suitable for smelting, furnace front, cast iron, etc. In addition to the above, there are also some special labor protection shoe covers used, such as canvas, asbestos, aluminum film labor protection shoe covers, etc.
Selection and Maintenance of Protective Labor Shoes The selection of protective labor shoes should be based on the nature and degree of hazards in the working environment. Protective labor shoes should have product certificates and product instructions. Before use, read the instruction manual according to the conditions of use, and use it correctly. Special protective labor shoes should be inspected and kept clean after use, and stored in a dry place.
