Teach you how to install anti-static workbench to ensure effective
Many manufacturers of workbenches used on production lines do not know how to install anti-static workbenches. The following anti-static experts will explain how to install anti-static workbenches in six steps:
1. Wipe all parts of the anti-static workbench with anti-static cleaning agent to keep it clean and prolong its life. Do not use strong acid or alkali cleaning agent to clean the anti-static work surface (clean it regularly).
2. Lay anti-static table mats, and the anti-static work table should be completely placed on the anti-static floor mat to ensure safety
3. Determine the size of the anti-static workbench according to the work needs. The measurement must be standard. Too large or too small will affect normal work.
4. Install the anti-static grounding buckle, press down the star claw connector from the front of the anti-static table pad, and make it pass through the table pad to ensure good electrical contact
5. The electrostatic grounding wire of the anti-static workbench must be laid well to avoid inconvenience caused by changes. After installation, check whether the static electricity can be discharged well, and only when it meets the requirements can it be used.
6. The workbench on the production line should be grounded electrostatically. If the workbench is not properly grounded, the anti-static effect will not be achieved.