Anti-static turnover car will not cause harm to the human body

Anti-static turnover car will not cause harm to the human body

Anti-static turnover car is no harm to the human body. If there is any damage, the general anti-static PCB turnover car is divided into anti-static storage space (PCB board), steel frame, anti-static roller and/or anti-static metal. Chain; static electricity is released through anti-static rollers and metal chains. The easiest way to install an anti-static turnover car:

1. First, connect an outer frame to the four support round rods and screw them tightly;

2, the required PCB slot plate is placed on the round bar, pay attention to the single panel placed at the two ends, the double panel can be placed in the middle;

3. Install another frame and screw it tightly;

4, install anti-static casters, can be clamped with a large forceps;

5. Adjust the distance according to the size of the PCB.

It is not necessary to have it. If the four wheels of the revolving car are ESD, use a heavy hammer surface resistance tester, one on the car and one on the floor. If the test resistance is below the 9th power of 10, the turnover is indicated. The car is OK to the ground.