How to use sticky mats
After using the sticky mats in hospitals for a period of time, the surface film layer will be contaminated, and it is necessary to tear off the surface film layer. Many people start from the corner with the label and tear it off diagonally. Doing so can easily cause pollutants attached to the sticky mat to fly up and enter the clean room through air flow. We recommend the following steps to tear off the film layer to be replaced:
1. Find the color label on the edge of the mat;
2. Pick up the label and slowly peel off the film layer from the edge of the mat;
3. Continue to peel the film upwards and separate it from the mat until all four corners are separated from the mat;
4. Pull the four separated corners to the middle of the mat to form a tent shape;
5. Slowly separate the film in the middle of the mat;
6. Fold the film inward until it is small enough to be discarded.
7. The contaminated film should be thrown outside the locker room. Staff cannot tear off the label or tear off the film from the mat at will, but should follow the above steps to slowly tear off the film. When the film surface is covered with dust during use, the viscosity of the sticky dust mat will decrease. At this time, it is necessary to tear off this layer of the sticky dust mat. It is also important to tear off the sticky dust mat. First, slowly separate the four corners of the dust mat from the pad, then move closer to the middle, wrap the dust inside, and fold the film inward until it is small enough to be discarded. In this way, the pollutants attached to the dust removal mat will not fly around, ensuring the dust removal effect. The sticky dust mat has strong adhesion, does not fall off, can be used more than 100 times, is easy to replace, does not require mopping or water cleaning, and has a storage period of 1-3 years.