What kind of glue is used for anti-static rubber mat
The anti-static rubber must be laid with copper foil on the ground before laying. In order to ensure good contact between the anti-static rubber and the copper foil, the anti-static rubber needs to be fixed, and the fixing is firm enough and will not cause damage to the anti-static rubber. One way is to use glue.
However, due to the order of laying, the glue is bound to be above the copper foil. In order to ensure the conduction between the anti-static rubber and the copper foil, the best choice is to use conductive glue, which can still conduct electricity after drying and bonding. Ensure the continuity between the anti-static rubber and the copper foil. If you have to use glue to fix and you can't find conductive glue, you can use ordinary glue, but it can't be fully coated like conductive glue. At this time, it is recommended to only apply glue on the edge and center line of the anti-static rubber. Ensure the contact between the anti-static rubber and the copper foil, but it is best to use conductive glue for full coating.